昆山粉尘是否涉爆 粉尘爆炸测试 粉尘云爆炸筛选

粉尘层着火温度（Minimum Ignition Temperature of dust layer）、粉尘云极限氧浓度（Limiting Oxygen Concentration）

粉尘爆炸项目

粉尘爆炸，粉尘爆炸可爆性筛选、粉尘云爆炸压力、粉尘云爆炸压力上升速率（Maximum rate of explosion pressure rise）、爆炸指数（Explosion index）、粉尘云*小爆炸浓度（Minimum Explosion Concentration）、也称：爆炸下限（LEL, Lower Explosion Limit）、粉尘云*小点火能量（Minimum Ignition Energy）、粉尘云着火温度（Minimum Ignition Temperature of dust cloud）、粉尘层着火温度（Minimum Ignition Temperature of dust layer）、粉尘云极限氧浓度（Limiting Oxygen Concentration）。

粉尘爆炸标准

粉尘爆炸参考标准

GB/T 粉尘云爆炸压力和爆炸指数测定方法

ISO 6184/1-1985 Determination of explosion indices of combustible dusts in air

BS EN 14034-1:2004 Determination of the maximum explosion pressure Pmax of dust clouds

BS EN 14034-2:2006 Determination of the maximum rate of explosion pressure (dp/dt)max of dust clouds

ASTM E 1226-10 Standard test method for explosibility of dust clouds

GB/T 粉尘云爆炸下限浓度测定方法

BS EN 14034-3:2006 Determination of the lower explosion limit LEL of dust clouds

ASTM E 1515-07 Standard test method for minimum explosible concentration of combustible dusts

GB/T 粉尘云*小着火能量测定方法

IEC 61241-2-3-1994 Test methods Section 3 Method for determining minimum ignition energy of dust air mixtures

BS EN Determination of minimum ignition energy of dust/air mixtures

ASTM E 2019-03(2007) Standard test method for minimum ignition energy of a dust cloud in air

GB/T 粉尘云着火温度测定方法

IEC 61241-2-1:1994 Test methods Section 1 Methods for determining the minimum ignition temperatures of dust

BS EN 50281-2-1:1999 Electrical apparatus for use in the presence of combustible dust-Part 2-1: Test methods-Methods of determining minimum ignition temperatures

ASTM E 1491-06 Standard test method for minimum autoignition temperature of dust clouds

GB/T 粉尘层着火温度测定方法

IEC 61241-2-1:1994 Test methods Section 1 Methods for determining the minimum ignition temperatures of dust

BS EN 50281-2-1:1999 Electrical apparatus for use in the presence of combustible dust-Part 2-1: Test methods-Methods of determining minimum ignition temperatures

ASTM E 2021-09 Standard test method for hot surface ignition temperature of dust layers